주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

axel- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다

단계 라인

[*title] Assemble new screen
[*
black] RemoveBefore going any further, test your new screen by plugging it to the device's main flex and powering it on. If all is well, power off. If not, contact your screen reseller.
[* black] Carefully remove
the earpiece from screen.Andscreen, by pulling on it gently.
[* black] Ideally, remove the earpiece with its adhesive, as
you will need to put itthe earpiece back on the new screen when placeyou reassemble the device.
[* black] Make '''sure the earpiece connects properly with the main flex''' before you reassemble. Otherwise you will not get sound from the earpiece, and won't be able to make calls normally.
[* black] Ensure the midframe is clean: any glue residue will limit
the new screenadhesive's capacity to properly stick to the midframe.
[* black] Carefully apply the front screen adhesive, starting at one end of the phone (top or bottom) and slowly applying it along the midframe edges, on the sides.
[* black] Finally, put the new screen in place, pressing it firmly into place.
[* black] Be careful: '''don't press too hard on the earpiece area''' at the top, as the screen is '''particularly fragile''' around the earpiece
.
[*title] Assemble new screen
[*
black] RemoveBefore going any further, test your new screen by plugging it to the device's main flex and powering it on. If all is well, power off. If not, contact your screen reseller.
[* black] Carefully remove
the earpiece from screen.Andscreen, by pulling on it gently.
[* black] Ideally, remove the earpiece with its adhesive, as
you will need to put itthe earpiece back on the new screen when placeyou reassemble the device.
[* black] Make '''sure the earpiece connects properly with the main flex''' before you reassemble. Otherwise you will not get sound from the earpiece, and won't be able to make calls normally.
[* black] Ensure the midframe is clean: any glue residue will limit
the new screenadhesive's capacity to properly stick to the midframe.
[* black] Carefully apply the front screen adhesive, starting at one end of the phone (top or bottom) and slowly applying it along the midframe edges, on the sides.
[* black] Finally, put the new screen in place, pressing it firmly into place.
[* black] Be careful: '''don't press too hard on the earpiece area''' at the top, as the screen is '''particularly fragile''' around the earpiece
.