주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Tim Osborn- 에 의해 수정

편집 거부됨 완료자 Scott Havard

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Use the flat tip of a spudger to gently lift the battery connector up off its socket on the logic board.
[* icon_caution] Be very careful to only pry up on the battery connector and not on the socket itself. If you pry up on the logic board socket, you may break the connector entirely.
+[* icon_caution] The battery connector must be disconnected before you disconnect the LCD cable in the next step or you run a great chance of blowing the backlight fuse.