메인 콘텐츠로 스킵하기

#9 단계의 변경 사항

Scott Head- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Turn your car on and let it warm up for about 5-10 minutes.
[* red] There is a valve that allows air to escape so not to be trapped in the tube. Loosing this to expose the small escape hole on the side of it.
[* black] As the car warms up, the engine will start needing the coolant so it will begin to circulate. As soon as you see small amount of coolant coming out of the hole, you can screw it down.
[* black] Put the radiator cap back on and turn off your car allowing it to cool off.
[* black] After it is cool, top off the coolant again by filling up the radiator and turn the car back on.
[* black] You can also at this point top off the coolant reservoir.
[* black] You are done!

이미지 1

이전 이미지가 없습니다

추가

이미지 2

이전 이미지가 없습니다

추가

이미지 3

이전 이미지가 없습니다

추가