물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Elizabeth Kamine-

편집 승인됨 완료자 Elizabeth Kamine

이전
이후
변경 사항 없음

단계 라인

-[* red] Using a Phillips #000 Precision Screw Driver, remove both 4.5 mm screws holding the bottom into place.
+[* red] Using a Phillips #000 Precision Screwdriver, remove both 4.5 mm screws holding the bottom into place.
[* orange] Remove both 4.5 mm screws holding the side into place.
-[* yellow] Also be sure to remove the 4.5 mm screw underneath the A/V flap.
-[* green] Finally, remove the 4.0 mm screw on the left-side wrist strap loop.
+[* yellow] Remove the 4.5 mm screw underneath the A/V flap.
+[* green] Remove the 4.0 mm screw on the left-side wrist strap loop.