주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

편집자 Elizabeth Kamine-

편집 승인됨 완료자 Elizabeth Kamine

이전
이후
변경 사항 없음

단계 라인

-[* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly, keep track of the screws and their corresponding locations.
[* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps.
[* red] Remove both 4.5 mm screws holding the bottom into place.
[* orange] Remove both 4.5 mm screws holding the side into place.
[* yellow] Remove the 4.5 mm screw underneath the A/V flap.
[* green] Remove the 4.0 mm screw on the left-side wrist strap loop.