주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Casey Matalone- 에 의해 수정

편집 승인됨 완료자 Casey Matalone

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Now move to the front of the hole and remove the cardboard.
-[* black] Again size your material; however, this time you want you material to be roughly the size and shape of your hole.
- [* icon_note] Cut out at least two or three layers of the material in the beginning. You may need more later.
+[* black] With the throw away paint brush begin to apply the resin to the back side of the hole directly on the cleaned surface.
+[* black] After the resin is on take one of the fiberglass pieces you cut out earlier and place over the hole onto the resin.
+[* black] Continuing with the rush apply more resin over onto the fiberglass until it is entirely soaked.