주요 콘텐츠로 건너뛰기

#6단계의 변경 사항

Casey Matalone- 에 의해 수정

편집 승인됨 완료자 Casey Matalone

이전
이후
변경 사항이 없습니다

단계 라인

[* black] With the throw away paint brush begin to apply the resin to the back side of the hole directly on the cleaned surface.
[* black] After the resin is on, take one of the fiberglass pieces you cut out earlier and place it over the hole onto the resin.
-[* black] Continuing with the brush, apply more resin over onto the fiberglass until it is entirely soaked.
+[* black] Continuing with the brush, apply more resin onto the fiberglass until it is entirely soaked.