주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

Casey Matalone- 에 의해 수정

편집 승인됨 완료자 Casey Matalone

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Once dry, confirm that the resin has fully hardened.
[* black] Use the sand paper to sand the resin surface and existing surface to create a seamless finish.
[* icon_note] Once again, start with the rough sand paper and then finish sanding with the fine.
-[* black] After sanding the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.
+[* black] After sanding, the fiber glass should be flush with the existing surface of the body. At this point feel free to paint over the hole and get back on the lake.