#7단계의 변경 사항
편집자 Hannah Skiff-
편집 승인됨 완료자 Hannah Skiff
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Grab your torque wrench and set it to 32 ft-lbs |
|---|---|
| - | [* black] Make sure all of the oil has drained from the engine and wipe any spills of the ground |
| - | [* black] Replace the drain plug and use the torque wrench with the 14mm socket to tighten the drain plug until the torque wrench makes a "clicking" noise |
| - | [* icon_caution] Be careful to not over tighten the drain plug with the torque wrench. This could cause the head of the bolt to snap off and be stuck in your engine |
| + | [* black] Set the torque wrench to 32 ft-lbs. |
| + | [* black] Check if all of the oil has drained from the engine by seeing if the oil is still flowing into the drain pan. |
| + | [* black] Wipe any spills on the ground. |
| + | [* black] Replace the drain plug. |
| + | [* black] Use the 14mm socket torque wrench to tighten the drain plug until the wrench makes a "clicking" noise. |
| + | [* icon_caution] Do not over tighten the drain plug with the torque wrench. Too much force could cause the head of the bolt to snap off and become stuck in the engine. |