#10단계의 변경 사항
편집자 Samuel Melendez-
편집 승인됨 완료자 Samuel Melendez
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Replace fill cap and start the |
|---|---|
| - | [* black] Let |
| + | [* black] Replace fill cap and start the truck and let it run for 3-4 minutes then turn off the engine. |
| + | [* black] Let truck sit for 5 minutes |
| [* black] Locate the engine dipstick. It will be on the left side of the compartment and labeled with a yellow circle | |
| [* black] Remove the dipstick. Wipe clean. Reinsert and remove and see if the oil is between the two dots on the dipstick | |
| [* icon_note] If the oil is between the two dots or slightly above then you are finished. If not then add a little oil at a time until it is between those dots |