물건을 수리하세요 커뮤니티 상점

#3단계의 변경 사항

편집자 Leland Lam-

편집 승인됨 완료자 Leland Lam

이전
이후
변경 사항 없음

단계 라인

[* black] Make sure the brake pads are properly aligned with the braking surface on the rim.
-[* red] For the left caliper pad, marked in the red circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
- [* red] Align the bottom edge of the pad with the bottom edge of the braking surface and then tighten.
-[* yellow] For the right caliper pad, marked in the yellow circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
- [* yellow] Align the top edge of the pad with the top edge of the braking surface and then tighten.
+[* icon_note] Both pads are loosened the same way.
+ [* red] For the left caliper pad, marked in the red circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
+ [* red] Align the bottom edge of the pad with the bottom edge of the braking surface and then tighten.
+ [* yellow] For the right caliper pad, marked in the yellow circle, loosen the bolt with a 4mm Allen wrench so the pad can be adjusted.
+ [* yellow] Align the top edge of the pad with the top edge of the braking surface and then tighten.