#4단계의 변경 사항
편집자 Leland Lam-
편집 승인됨 완료자 Leland Lam
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Retension your brake caliper. |
|---|---|
| - | [* black] Make sure your brake cable is inside the groove on the two plates that hold the brake cable. |
| - | [* black] Make sure the adjustment lever is turned down like in the picture. |
| - | [* black] Tighten the brake cable bolt with your fingers. |
| - | [* black] Squeeze the caliper until both pads are 1mm from the rim. |
| - | [* black] Loosen the brake cable bolt, pull the cable downward to get rid of slack, and tighten the bolt. |
| + | [* black] Make sure your brake cable is inside the groove on the two plates that hold the brake cable. |