물건을 수리하세요 커뮤니티 상점

#6단계의 변경 사항

편집자 Jonathan Fish-

승인 대기 중

이전
이후
변경 사항 없음

단계 라인

[* red] Fine tune the derailleur by tightening or loosening the barrel adjuster screw located where the cable and cable housing meet the derailleur.
+[* icon_note] Loosening the barrel adjuster screw pulls in the cable, causing the derailleur to move slightly towards a larger gear. Tightening causes the derailler to move towards a smaller gear.
[* black] Shift through each gear while pedaling. The derailleur should move one gear every time you shift up or down on the shifter.
[* black] If the chain skips or makes noise when not shifting, use the barrel adjustment screw to position the guide sprocket so it is right under the gear that corresponds to the number the shifter displays.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.
-[* icon_note] Loosening the barrel adjuster screw pulls in the cable, causing the derailleur to move slightly towards a larger gear. Tightening causes the derailler to move towards a smaller gear.