#3단계의 변경 사항
편집자 Jonathan Fish-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Shift the rear derailleur into the lowest (largest) gear. | |
| [* red] Align the rear guide sprocket of the derailleur with the lowest (largest) gear, by tightening or loosening the screw labeled "L". | |
| - | [* icon_note] This alignment sets the maximum inward distance that the derailleur can move the chain. Without setting this boundary, the derailleur could shift the bike chain off of the gear and onto the axle. This boundary setting is referred to as the low end adjustment stop. |
| [* yellow] The second picture is of a misaligned derailleur. |