#2단계의 변경 사항
단계 라인
| [title] Thermally bonding the heatsinks | |
| - | [* black] The aim here is to sandwich |
| + | [* black] The aim here is to sandwich thick thermal pads between your MacBook's case and it's heatsinks. |
| [* black] On my machine, a mid-2010 15 inch MBP, I needed to use three strips of a 2mm thick thermal pad under the centre heatsink, two strips under the side one and one strip atop each to make contact with the bottom case. | |
| [* black] Try to use enough layers that the heatsinks are in good contact, but not so many that anything needs to bend to fit back. |