물건을 수리하세요 커뮤니티 상점

#2단계의 변경 사항

편집자 Erica Partida-

편집 승인됨 완료자 Erica Partida

이전
이후
변경 사항 없음

단계 라인

-[* orange] to get access to the internal components first remove the two rubber screw covers and the two Phillips PM2.0×4.0 screws at the bottom of the enclosure.
-[* black] to detach the display bezel flex the inside edges on the top, bottom, left and right sides until it is fully detached then lift away from the rest of the screen enclosure.
+[* orange] Remove the two rubber screw covers and the two Phillips PM2.0×4.0 screws at the bottom of the enclosure. This will give you access to the internal components.
+[* black] To detach the display bezel, flex the inside edges on the top, bottom, left, and right sides until it is fully detached. Then, lift it away from the rest of the screen enclosure.