#3단계의 변경 사항
편집자 Brandon Funk-
편집 거부됨 완료자 Kristen Gismondi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* orange] next, remove the four Phillips 2.0×3.0 screws at each corner that secure the display panel to the enclosure. Then you can remove the hinges on each side. |
|---|---|
| - | [* red] remove the display panel cable by first releasing the adhesive strip then you can safely disconnect the display panel cable form its port. |
| - | [* black] You can also view this maintenance and service guide provided by hp here: http://h10032.www1.hp.com/ctg/Manual/c02494476 |
| + | [title] Remove the LCD. |
| + | [* orange] Remove the four Phillips 2.0×3.0 screws at each corner. These secure the display panel to the enclosure. This will allow you to remove the hinges on the side. |