이 단계의 변경 사항
편집자 Jacob Reiter-
편집 승인됨 완료자 Jacob Reiter
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Grease up the second bearing, and replace it. |
|---|---|
| + | [* black] Thread the nuts onto the axle to hold the brake in place. Be sure not to over-tighten them. |
| + | [* black] A good way to be sure that you didn't over-tighten the nuts is to make sure that all of the parts spin. |
| + | [* black] Remember, when you spin the brake backwards, it should be tougher, it's supposed to lock up. |