#3 단계의 변경 사항

Jeremy Rabaino- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Gently pull the red and black wires.
[* black] Now that all cables and screws are disconnected, you can now remove the flash assembly.
[* icon_note] To reinsert, line up connector with the copper leads on the camera, and gently press the white piece into place.
[* icon_reminder] The black cable should be closer to the top of the camera.