#2단계의 변경 사항
편집자 DistroHopper39B-
편집 승인됨 완료자 Carsten Frauenheim
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Carefully insert a small flathead screwdriver in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver. |
|---|---|
| + | [* black] Carefully insert a small flathead screwdriver or [product|IF145-259-1|Jimmy] in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver. |
| [* icon_note] The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part. | |
| [* black] To make this job easier, heat up the adhesive with a hairdryer on low heat for a few seconds. |