주요 콘텐츠로 건너뛰기

#4 단계의 변경 사항

Sam Goldheart- 에 의해 수정

편집 승인됨 에 의해 Sam Goldheart

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] Using a curved blade minimizes the chance of scratching the case or cracking the glass. Only pry with the curved section of the blade, and not the tip or flat section.
[* black] Place the curved section of the blade in the gap between the glass and case on the lower edge of the watch face, and press firmly down into the gap.
[* icon_caution] Be very careful to havemaintain complete control over the knife—once the gap opens, if you're pressing too hard on the knife it may continueslip in and cut the battery.
[* icon_note] This should wedge the gap wideropen and cause the glass to lift slightly awayup from the case.
[* icon_caution] Be very careful to havemaintain complete control over the knife—once the gap opens, if you're pressing too hard on the knife it may continueslip in and cut the battery.
[* icon_note] This should wedge the gap wideropen and cause the glass to lift slightly awayup from the case.
[* black] When the glass has lifted, gently rotate the knife down, opening the gap more by pushing the glass up.