기기를 수리하세요

수리할 권리

상점

#14단계의 변경 사항

Jeff Suovanen- 에 의해 수정

편집 승인됨 완료자 Jeff Suovanen

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Wedge a plasticUse scissors to cut one of your opening toolpicks to about the width of the battery. Try not to leave any sharp corners.
[* black] Insert the modified pick between the right side of the battery and the case.
[* black] PryUse constant, steady pressure to ''slowly'' pry the battery up to separateup, separating it from the adhesive securing it to the system board.
[* icon_caution] Be careful not to deform or puncture the battery.
[* black] On the larger (42 mm) models, it's possible to [https://d3nevzfk7ii3be.cloudfront.net/igi/diYfGlClCsW1mXT2.full|accidentally pry at the system board|new_window=true] underneath the battery. Insert the pick only far enough to get underneath the battery, not the system board.
[* black] If needed, apply a little high concentration isopropyl alcohol (90% or greater) around and under the battery to help weaken the adhesive.
[* black] Wedge a plasticUse scissors to cut one of your opening toolpicks to about the width of the battery. Try not to leave any sharp corners.
[* black] Insert the modified pick between the right side of the battery and the case.
[* black] PryUse constant, steady pressure to ''slowly'' pry the battery up to separateup, separating it from the adhesive securing it to the system board.
[* icon_caution] Be careful not to deform or puncture the battery.
[* black] On the larger (42 mm) models, it's possible to [https://d3nevzfk7ii3be.cloudfront.net/igi/diYfGlClCsW1mXT2.full|accidentally pry at the system board|new_window=true] underneath the battery. Insert the pick only far enough to get underneath the battery, not the system board.
[* black] If needed, apply a little high concentration isopropyl alcohol (90% or greater) around and under the battery to help weaken the adhesive.
[* icon_caution] '''Do not''' attempt to remove the battery as it is still connected.

이미지 1

이전 버전

새로운 버전

이미지 2

이전 버전

새로운 버전

이미지 3

이전 버전

새로운 버전