주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Andrew Optimus Goldheart- 에 의해 수정

편집 승인됨 완료자 Andrew Optimus Goldheart

이전
이후
변경 사항이 없습니다

단계 라인

[* icon_note] The bracket that contains the display and digitizer cable connections is made up of an upper and lower piece. The connectors are secured to the lower, and the upper must be removed to disconnect them.
[* black] Use fine-tipped tweezers to grasp the lower half of the bracket.
+[* icon_note] There is a small metal tab that protrudes downward from the upper metal bracket.
+[* black] Insert a small (1 mm) flathead screwdriver between the tab and the lower bracket, and rotate the screwdriver to spread the gap.
+[* black] This will release two tabs that hold the upper bracket to the lower, and should free the upper bracket.