주요 콘텐츠로 건너뛰기

#8단계의 변경 사항

Taylor Dixon- 에 의해 수정

편집 승인됨 완료자 Taylor Dixon

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] If applicable, peel off the tab from the back of the new battery, exposing the adhesive.
+[* icon_note] If your replacement battery came with pre-installed adhesive, peel off the protective tab now, exposing the adhesive.
[* black] Rotate the battery down into its slot, and press it into position.
-[* icon_note] Press the battery down against the S1 to re-adhere it in place.
+[* black] Press the battery down against the S1 to re-adhere it in place.
[* icon_note] Now is the best time to test powering on your watch—if it doesn't turn on, double check all three connectors and try again.