주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

편집자 Arthur Shi-

편집 승인됨 완료자 Arthur Shi

이전
이후
변경 사항 없음

단계 라인

[* black] Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.
-[* icon_note] Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.
-[* icon_caution] Be careful not to knock off the resistor C78 when sliding the board into the chasis.
+ [* icon_note] As you slide the iPod out, small components may snag on the edge of the casing. Move the iPod side to side to clear these components.
+ [* icon_note] Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.
[* icon_caution] Be careful not to break the logic board connector off the iPod. The ribbon cable sits at the very top of the connector.