#3단계의 변경 사항
편집자 Techy95_Fix-
편집 승인됨 완료자 Arthur Shi
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel. | |
| [* icon_note] Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile. | |
| + | [* icon_caution] Be careful not to knock off the resistor C78 when sliding the board into the chasis. |
| [* icon_caution] Be careful not to break the logic board connector off the iPod. The ribbon cable sits at the very top of the connector. |