#4단계의 변경 사항
편집자 William DiVittorio-
편집 승인됨 완료자 William DiVittorio
- 이전
- 이후
- 변경 사항 없음
단계 라인
| - | [* black] Now that you have a new chain, it is time to install it. The process to put a new chain on is a little different from taking it off. |
|---|---|
| - | [* black] First, put the rear wheel back on the frame. [guide|41514|Link Here] |
| [* black] Set the chain, with the loose end on top, on the chain ring. | |
| [* red] Make sure the chain goes thru the guide at the top of the chain ring. | |
| + | [* black] Connect the ends of the masterlink and pull, it should snap into place. If not, place the master link above the rear gear, hold the rear tire in place, and give the pedal a push. The stress on the chain should snap the master link into place. |