#1단계의 변경 사항
편집자 Scott Kaufman-
편집 승인됨 완료자 Scott Kaufman
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Shift the front derailleur to the 1st position (smallest cog and closest to the body of the bike) | |
| [* red] Adjust the "Low" screw with a screwdriver so the derailleur lines up vertically with the 1st gear. | |
| - | [* icon_note] Test your gears by holding your back tire off the ground and pedaling while you shift through your gears. |
| + | [* icon_note] Test your gears by holding your back tire off the ground and pedaling while you shift through your gears. If it is aligned correctly, the chain will not rub on the derailleur. |