How to adjust the 2006 Iron Horse Warrior front derailleur 단계 #3 기록

#3단계의 변경 사항

편집자 Scott Kaufman- 2015년 5월 28일

편집 승인됨 완료자 Scott Kaufman

+	[* black] To tighten the cable, place the derailleur in the 1st gear position. This position requires the least amount of tension on the cable.
+	[* black] Loosen the 6mm hex nut using an Allen wrench just enough to allow the cable to come free.
+	[* black] Pull the cable using your hands as tight as you can. Replace the cable under the screw and tighten the screw by turning it clockwise.