iPod Nano 2nd Generation Battery Replacement 단계 #5 기록

#5단계의 변경 사항

편집자 James Beatty- 2025년 2월 4일

편집 승인됨 완료자 Clay Eickemeyer

	[* black] Pull the battery wires through the logic board to free the battery. If the wires don't easily come free, make sure the wires are straight and all the solder has been removed.
-	[* black] Slide the three wires of the replacement battery through the holes in the logic board. Going from the edge of the iPod, the order of wires is black, red, white.
+	[* black] Slide the three wires of the replacement battery through the holes in the logic board. Going from the edge of the iPod, the order of wires is black at the far right (close to the metal frame), red in the middle, and white to the far left.