주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Andrew Bookholt- 에 의해 수정

승인 대기 중

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Repeat the previous steps to separate the right side of the rear display bezel from the display.
[* black] Use your spudger to pry the plastic retaining clips on the rear display bezel over the raised aluminum tabs on the front display bezel.
[* black] At this point, the clips on the left and right edges of the rear display bezel should be free from the raised aluminum tabs on the front display bezel. If they are not, use a spudger to pry them past the front display bezel.