주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Matthew Newsom- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD ribbon socket.
-[* black] Use your fingernail or edge of a spudger to push both sides of the black retaining bracket on the UMD laser ribbon socket to the right.
-[* black] After flipping up the locking tabs on both connectors, use your fingers or a spudger to gently pull the cables straight out of the connectors.
+[* red] Use your fingernail or the edge of a spudger to flip up the retaining flap on the UMD drive ribbon socket.
+[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itself
+[* yellow] Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.
+[* black] Use a spudger to gently pull both ribbon cables straight out of their sockets.

이미지 1

이전 버전

새로운 버전