주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Matthew Newsom- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using a fingernail or spudger, flip up the retaining bracketflap on the following three ZIF connectors.
[* black] Using a fingernail or spudger, flip up the retaining bracketflap on the following three ZIF connectors.
[* red] Action button contact pad ribbon
[* orange] UMD laserdrive ribbon
[*

[*
yellow] Release the UMD drive ribbon retaining tray by pulling the black tabs away from the connector.
[* orange] UMD laserdrive ribbon
[*

[*
yellow] Release the UMD drive ribbon retaining tray by pulling the black tabs away from the connector.
[* black] After flipping up the locking tabs on all three connectors, use your fingers or a spudger to gently pull the cables straight out of the connectors.

이미지 1

이전 버전

새로운 버전