주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Matthew Newsom- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors.
[* red] Action button contact pad ribbon
[* orange] UMD drive ribbon
[* yellow] Releaseicon_caution] Be sure you are prying up on the UMD drive ribbon retaining tray by pullingflap, not the socket itself
[* yellow] Use your fingernail or tip of a spudger to push both sides of
the black tabs away fromretaining flap on the connectorUMD laser ribbon socket to the right.
[* black] After flipping up the locking tabs on all three connectors, useUse your fingers or a spudger to gently pull theall three ribbon cables straight out of the connectorstheir sockets.
[* yellow] Releaseicon_caution] Be sure you are prying up on the UMD drive ribbon retaining tray by pullingflap, not the socket itself
[* yellow] Use your fingernail or tip of a spudger to push both sides of
the black tabs away fromretaining flap on the connectorUMD laser ribbon socket to the right.
[* black] After flipping up the locking tabs on all three connectors, useUse your fingers or a spudger to gently pull theall three ribbon cables straight out of the connectorstheir sockets.