주요 콘텐츠로 건너뛰기

#3단계의 변경 사항

Matthew Newsom- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Using a fingernail or spudger, flip up the retaining flap on the following three ZIF connectors.
[* red] Action button contact pad ribbon
[* orange] UMD drive ribbon
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itselfitself.
[* icon_caution] Be sure you are prying up on the retaining flap, not the socket itselfitself.
[* yellow] Use your fingernail or tip of a spudger to push both sides of the black retaining flap on the UMD laser ribbon socket to the right.
[* black] Use your fingers or a spudger to gently pull all three ribbon cables straight out of their sockets.