주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Olli 4- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the edge of a plastic opening tool to pry the earpiece speaker away fromoff the adhesive securingPower & Sensor cable you're about to replace
[* black] ! the earpiece is actually to be considered as one piece with a thin foam that is actually glued onto the P&S. So softly pry the foam off, otherwise
it will tear, and you will need to glue the remaining (thinner) foam onto the replacement part, and that is not recommended.
[* black] The earpiece may look different form
the front panelactual picture, looking like flat oval metal piece with nano-thin copper windings around it.
[* black] Use the edge of a plastic opening tool to pry the earpiece speaker away fromoff the adhesive securingPower & Sensor cable you're about to replace
[* black] ! the earpiece is actually to be considered as one piece with a thin foam that is actually glued onto the P&S. So softly pry the foam off, otherwise
it will tear, and you will need to glue the remaining (thinner) foam onto the replacement part, and that is not recommended.
[* black] The earpiece may look different form
the front panelactual picture, looking like flat oval metal piece with nano-thin copper windings around it.