주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Olli 4- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] !! Tricky: The earpiece is glued upon the Power & Sensor cable. That one is itself glued upon the supporting frame.
[*
black] Use the edge of a plastic opening tool to pry the part of the Power & Sensor cable that's below the earpiece off the support frame. Make sure not to peel off the earpiece speaker away from the adhesive securingcable, it's wiser to do that after you have the cable. That simply because there's a foam in between the earpiece and the cable, and you could rip it, making it more difficult to reassemble the earpiece.
[* black] note: The earpiece may look different form
the front panelactual picture, looking like flat oval metal piece with nano-thin copper windings around it.
[* black] !! Tricky: The earpiece is glued upon the Power & Sensor cable. That one is itself glued upon the supporting frame.
[*
black] Use the edge of a plastic opening tool to pry the part of the Power & Sensor cable that's below the earpiece off the support frame. Make sure not to peel off the earpiece speaker away from the adhesive securingcable, it's wiser to do that after you have the cable. That simply because there's a foam in between the earpiece and the cable, and you could rip it, making it more difficult to reassemble the earpiece.
[* black] note: The earpiece may look different form
the front panelactual picture, looking like flat oval metal piece with nano-thin copper windings around it.