주요 콘텐츠로 건너뛰기

#2 단계의 변경 사항

Olli 4- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Use the edge of a plastic opening tool to pry the part of the Power & Sensor cable that is under the earpiece speaker away from the adhesive securing it to the front panel.
[* black] ! the earpiece is to be considered as one piece together with a thin foam that is glued onto the Power & Speaker Cable.
[* black] Removing the earpiece totally from the Power & Earspeaker cable in this stage will damage this foam. You will then need to fit glue onto the speaker piece yourself when fitting it onto the new Power & Sensor Cable, risking the earpiece to get blocked by glue, and thus being useless.
[* black] Use the edge of a plastic opening tool to pry the part of the Power & Sensor cable that is under the earpiece speaker away from the adhesive securing it to the front panel.
[* black] ! the earpiece is to be considered as one piece together with a thin foam that is glued onto the Power & Speaker Cable.
[* black] Removing the earpiece totally from the Power & Earspeaker cable in this stage will damage this foam. You will then need to fit glue onto the speaker piece yourself when fitting it onto the new Power & Sensor Cable, risking the earpiece to get blocked by glue, and thus being useless.