주요 콘텐츠로 건너뛰기

#6 단계의 변경 사항

Jake Devincenzi- 에 의해 수정

편집 승인됨 에 의해 Jake Devincenzi

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* icon_note] If you are replacing the power & sensor cable with a new unit, use the edge of a plastic opening tool to peel the electronic power switch off its metal bracket.
[* black] Also be sure to transfer the proximity sensor foam/UV-filter adhered to the old power & sensor cable if your new one does not already come with one. It looks like a small square and can be peeled off with a tweezertweezers.
[* black] Also be sure to transfer the proximity sensor foam/UV-filter adhered to the old power & sensor cable if your new one does not already come with one. It looks like a small square and can be peeled off with a tweezertweezers.
[* black] Transfer the bracket to your new power & sensor cable.