주요 콘텐츠로 건너뛰기

이 단계의 변경 사항

Olli 4- 에 의해 수정

승인 대기 중

삭제되었습니다
추가
변경 사항이 없습니다

스텝 라인

[* black] Gently pry away the earpiece from the Power & Sensor cable. Peel gently at the bottom of the foam in between the two, so that the glue loosens from the cable. you might do this with a flat screwdriver, or even a fine stanley knife. As soon as it is loos at some point, continue prying the foam all around the earpiece. You should be able to recover it looking brand new.