#10단계의 변경 사항
편집자 cloclolulu-
- 이전
- 이후
- 변경 사항 없음
단계 라인
| + | [* black] Fit the two oscillation arms into the 2 pins of the wide hair trimmer first, and by spreading them. |
|---|---|
| + | [* black] Then tilt them to the inside, that the small latches keep it in place. |
| + | [* black] Gently lift the other ends of the arms above the pin of the cast part. Careful: you may break the arms if you lift too hard! |
이미지 1
이전 이미지 없음
추가