주요 콘텐츠로 건너뛰기

#11단계의 변경 사항

Ben Eisenman- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

-[* black] Remove the two tiny screws that hold the metal screw plate that is attached attached to the on/off switch
[* black] Grasp the metal screw plate attached to the on/off switch and lift slightly up and away from the rear panel. The button should come with the cable.
[* black] Gently peel up the on/off switch ribbon cable. Be sure to pull near where the ribbon cable is glued to the rear panel.