#4단계의 변경 사항
편집자 David Platt-
편집 승인됨 완료자 David Platt
- 이전
- 이후
- 변경 사항 없음
단계 라인
| [* black] Carefully remove all of the screws from the laptop case. | |
| - | [* icon_note] Note:If a screw is too tight, use pliers for additional grip and torque. Visible screws are marked with the yellow circles. Make sure to carefully place all screws into the correct spot on the diagram created earlier. Many screws are different sizes and lengths. It is extremely important that they go back to the exact same place during reassembly. |
| + | [* icon_note] Note:If a screw is too tight, use pliers for additional grip and torque. |
| + | [* icon_note] Carefully place all screws in the correct spot on the diagram. Many screws are different sizes and lengths. It is extremely important that all screws go back into the same screw hole they came out of during re-assembly. |
| [* icon_note] The screw sizes and types are: Phillips PM2.0x4.0, PM2.5x5.0, PM3.0x4.0, PM 2.5x7.0, PM 2.5x3.0, PM 2.5x9.0, PM 2.0x2.0, and PM 2.0x7.0. |