주요 콘텐츠로 건너뛰기

#1단계의 변경 사항

편집자 Adam O'Camb-

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항 없음

단계 라인

[* icon_note] Place the phone facedown.
[* icon_note] If your glass is shattered, put packing tape over the entire panel to hold it together during the removal process.
[* black] Lay the iOpener over the panel for about 60 seconds to loosen the adhesive around the edge of the glass.
[* black] Shift the iOpener to heat the remaining section of the panel for another 60 seconds.
+[* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.