물건을 수리하세요 커뮤니티 상점

#1단계의 변경 사항

편집자 Adam O'Camb-

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항 없음

단계 라인

[* icon_note] Opening your phone will compromise its waterproof seals. Have replacement adhesive ready before you proceed, or take care to avoid liquid exposure if you reassemble your phone without replacing the adhesive.
[* icon_note] If your glass is shattered, put packing tape over the entire panel to hold it together during the removal process.
-[* black] [guide|25705|Prepare an iOpener|new_window=true] and lay it over the rear panel for about two minutes to loosen the adhesive around the edge of the glass.
+[* black] Lay the heated iOpener over the rear panel for about two minutes to loosen the adhesive around the edge of the glass.
[* icon_note] You may need to reheat and reapply the iOpener several times to get the phone warm enough. Follow the iOpener instructions to avoid overheating.
[* black] Shift the iOpener to heat the remaining section of the panel for another two minutes.
[* icon_caution] A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the phone—the OLED display and internal battery are both susceptible to heat damage.