주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

삭제됨
추가
변경 사항이 없습니다

단계 라인

[* black] Heat the four corners of the front glass to soften adhesive.
[* black] Firmly grasp the edge of the midframe assembly.
[* black] Lift up on the midframe assembly while pushing down on the battery to separate the midframe assembly from the rest of the phone.
[* [* black] Be aware thatWhile lifting the midframe may snag or catchmidframe, be careful to avoid snagging it on the audio jackjack or charging port.
[* black] You may need to [guide|25705|heat|new_window=true] and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult
.
[* [* black] Be aware thatWhile lifting the midframe may snag or catchmidframe, be careful to avoid snagging it on the audio jackjack or charging port.
[* black] You may need to [guide|25705|heat|new_window=true] and apply an iOpener to the edges of the display to soften the display adhesive if midframe separation is difficult
.