주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

#3단계의 변경 사항

Evan Noronha- 에 의해 수정

편집 승인됨 완료자 Evan Noronha

이전
이후
변경 사항이 없습니다

단계 라인

[* blackicon_note] The following steps involve using opening picks to separate the display assembly from its plastic frame. Before beginning, read this [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|display assembly separation technique guide|new_window=true] to ensure you're not damaging the fused display.
[* icon_note
] Orient the phone so you are facing the back of the LCD faces youdisplay frame.
[* black] Insert an opening pick on the right side of the phone between the display assembly and plastic display frame.
[* icon_caution] Be sure to not angleOnly insert the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick angledat an upward angle to insert it between the plastic frame and the LCD.
[* icon_note] If you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not
avoid separating the display assembly.
[* black] flip the phone over
LCD and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)digitizer.
[* blackicon_note] The following steps involve using opening picks to separate the display assembly from its plastic frame. Before beginning, read this [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|display assembly separation technique guide|new_window=true] to ensure you're not damaging the fused display.
[* icon_note
] Orient the phone so you are facing the back of the LCD faces youdisplay frame.
[* black] Insert an opening pick on the right side of the phone between the display assembly and plastic display frame.
[* icon_caution] Be sure to not angleOnly insert the pick downward, as this can cause the pick to separate the digitizer from the LCD. Rather, keep the pick angledat an upward angle to insert it between the plastic frame and the LCD.
[* icon_note] If you are unsure of the proper way to do this, follow our [https://www.ifixit.com/Guide/Samsung+Galaxy+S6+Display+Assembly+Technique/45133|technique guide] to ensure you're not
avoid separating the display assembly.
[* black] flip the phone over
LCD and check to see if the pick shows through the glass. If so, pull it out carefully and reinsert it higher angle. (in case we want to put this back in later)digitizer.