주요 콘텐츠로 건너뛰기

#2단계의 변경 사항

Kyle Smith- 에 의해 수정

편집 승인됨 완료자 Kyle Smith

이전
이후
변경 사항이 없습니다

단계 라인

[* black] Working from the edge opposite the battery connectors, insert a spudger between the battery and the plastic frame and pry up. The battery is attached to the casing with an adhesive, but should slowly come free.
+ [* icon_note] If the battery isn't coming free, apply a few drops of high concentration (over 90%) isopropyl alcohol under the edge of the battery.
+ [* black] Wait about one minute for the alcohol solution to weaken the adhesive.
+ [* black] Use the flat end of a spudger to gently lift the battery.
+ [* icon_caution] Don't try to forcefully lever the battery out. If needed, apply a few more drops of alcohol to further weaken the adhesive. Never deform or puncture the battery with your pry tool.
+ [* icon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before continuing.