주요 콘텐츠로 건너뛰기

#4단계의 변경 사항

Miroslav Djuric- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

+[* black] Place the desoldering wick on top of the existing solder ball.
+[* black] Place the soldering iron on top of wick above the existing solder ball.
+[* black] Hold the soldering iron in place until the solder melts into the wick.
+[* black] Repeat the same procedure on the remaining two connectors.
+[* black] Lift the old battery out of the iPhone. Be sure that all the solder has been removed before pulling the wires away from the board. The wires should come free with little to no resistance.

이미지 1

이전 이미지 없음

추가