주요 콘텐츠로 건너뛰기

#5단계의 변경 사항

Miroslav Djuric- 에 의해 수정

승인 대기 중

이전
이후
변경 사항이 없습니다

단계 라인

+[* icon_note] We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.
+[* black] Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board.
+[* black] Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.

이미지 1

이전 이미지 없음

추가